Xilog Maestro Software Tutorial

Sketchup to Xilog Maestro-- 17-- 11/6. It is very primitive and cumbersome. It doesn't play well with itself, let alone with other software.

If you are using a pod and rail CNC, where you machine one part at a time, you will be cutting each part from a sheet material beforehand. Make sure you're not wasting time and money and make sure you're optimising your cut list. We offer which links up seamlessly with Polyboard to do just that. OptiCut takes Polyboard cut list and automatically generates a sequenced cutting map to reduce to a minimum saw cutting time and material waste. OptiCut works with both manual saws and automatically with CNC saws.

Machine works fine, but I can only program it by typing out the Gcode manually in the machine. Which is a real PIA! From what research ive done apparently Xilog is the appropriate software to use with this machine? I wanna be able to program comfortably on my laptop then transfer to machine either via floppy or network. Writing a program manually in gcode line for line at the machine just way too time consuming.

So hopefully Xilog is the answer to my woes? If not maybe you can point me in the right direction. From what I can tell I must only have the machine control half of the software, and not the program editing half. I have the control software on the machine which allows the setup of tools, Gcode editing/loading, manual control ect.

But I dont have anything to create/edit programs on a separate computer. So I have been resorting to just plotting out tool paths in gcode right in the machine control panel.

Its getting me by, but as you can imagine its a big hassle.If I wanna change the size of a part I have to completely go through my code line by line, as where this Xilog editing software should have some sort of parametric ability. But I dont know, old machine and documentation is hard to come. I havent talked to SCM, yet. I guess I didnt think they would be much help since this is an old machine I purchased used at auction. Worth a try I suppose. Xilog Plus (Just unpack to root.

Automation anywhere crack. Editor - XilogPlus/Bin/Parsifal.exe. Its 'standard' Xilog Plus for SCM Tech. Before writing programms, you must open and edit def.tlg file. I think, you old machine will not work with pgm files. You will need convert *.pgm to *.xxl with winxiso.exe (folder Bin).

Update: I found only one T99 with Xilog3 in our archive. Try this: Xilog 3 (Same procedure, unpack to root, run Xilog3.exe P.S. Any Xilog will not work under 64bit OS. Thank you very much! I found the serial number for my machine, it is AL1-001909 When I write a program in editor and save it to the machine, it is in the PGM format already. The machine has something called esacad on it which seems to be some kind of graphical programming interface.

It is very basic in functionality from what I can tell, I played with it only a little bit though. I have absolutely no documentation on this esacad and find even less on the net. But either way with Xilog plus I should be able to do what I need.

Auckcabs, I working for the SCM Group in Brazil(SCMTecmatic) and say for you load Software Tria and Parametrs and data of PLC not is easy the work. But you can try, you need the all data and Floppy Drives formated in the macchine.